Table of Contents
Advertisement
Increasing your DC cable size will help improve the situation.
Our company recommends the following cables for optimum inverter performance (apply
both 120V and 230V versions)
Model No
YK-PSW122KVA
YK-PSW122KVAE
YK-PSW242KVA
YK-PSW242KVAE
YK-PSW482KVA
YK-PSW482KVAE
YK-PSW1102KVA
YK-PSW1102KVAE
YK-PSW2202KVA
YK-PSW2202KVAE
Also, use only high quality copper wiring and keep cable length short from 3-6 feet.
2-7 Inverter Operation:
To operate the power inverter, turn it on using the ON/OFF switch on the front panel. The
power inverter is now ready to deliver AC power to your loads.
If you are operating several loads from the power inverter, turn them on separately after the
inverter has been turned on.
This will ensure that the power inverter does not have to deliver the starting currents for all
the loads at once.
2-7-1 Controls and indicators:
The ON / OFF switch turns the control circuit in the power inverter on and off.
The PSW2KVA/E Inverter operates from an input voltage ranging from:
10.0 to 16.0 VDC for 12V models
20.0 to 32.0 VDC for 24V models
42.0 to 62.0 VDC for 48V models
90.0 to 140.0VDC for 110V models
180.0 to 275.0VDC for 220V models
The Inverter will indicate high and low DC voltage conditions as follows:
WARNING!
The installation of a fuse must be on positive cable.
Failure to place a fuse on "+ "cables running between the inverter
and battery may cause damage to the inverter and will void
warranty.
Wire AWG
#2/0
#1/0
#2
#8
#16
11
Inline Fuse
250A
125A
70A
25A
15A
Advertisement
Table of Contents
