Cleaning; Disposal And Recycling Guidelines; Limited Warranty - Audio Research DS225 Owner's Manual

Model DS225

Cleaning

To maintain the new appearance of this unit, occa-
sionally wipe the front panel and top cover with a
soft, damp (not wet) cloth to remove dust. A mild,
non-alkaline soap solution or dilute isopropyl alco-
hol may be used to remove fingerprints or similar
smudges. Cleaners containing abrasives should not
be used as they will damage the anodized finish of
the front panel. A small, soft paint brush is effective
in removing dust from bevels, the recessed name-
plate and other features of the front panel.

Disposal and Recycling Guidelines

To dispose of this electronic product, do not place
in landfill. In accordance with the European Union
Waste Electrical and Electronic Equipment (WEEE)
directive effectiveAugust 2005, this product may
contain regulated materials which upon disposal re-
quire special reuse and recycling processing.
Please contact your dealer or importing distributor
for instructions on proper disposal of this product in
your country. Or, contact Audio Research Corpora-
tion (763-577-9700) for the name of your importing
distributor and how to contact them.
Packing and shipping materials may be disposed of
in a normal manner.
4

Limited Warranty

Audio Research Corporation products are covered
by a 3-Year Limited Warranty, or a 90-Day Limited
Warranty (vacuum tubes). This Limited Warranty ini-
tiates from the date of purchase, and is limited to
the original purchaser, or in the case of demonstra-
tion equipment, limited to the balance of warranty
remaining after original shipment to the retailer or
importer.
In the United States, the specific terms, conditions
and remedies for fulfillment of this Limited Warranty
are listed on the warranty card accompanying the
product in its shipping carton, or may be obtained
from the authorized retailer or from the Audio
Research Customer Service Department. Outside the
United States, the authorized importing retailer or
distributor has accepted the responsibility for war-
ranty of Audio Research products sold by them. The
specific terms and remedies for fulfillment of the
Limited Warranty may vary from country to country.
Warranty service should normally be obtained from
the importing retailer or distributor from whom the
product was purchased.
In the unlikely event that technical service beyond
the ability of the importer is required, Audio
Research will fulfill the terms and conditions of the
Limited Warranty. Such product must be returned at
the purchaser's expense to the Audio Research fac-
tory, along with a photocopy of the dated purchase
receipt for the product, a written description of the
problem(s) encountered, and any information
necessary for return shipment. The cost of return
shipment is the responsibility of the purchaser.