Zte MF823 Quick Manual

MF823
LTE USB Modem
Quick Guide
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Version No.: 1.1
Introduction
The ZTE MF823 USB modem is a multi-mode USB modem,
working in LTE/HSPA+/HSUPA/HSDPA/WCDMA/EDGE/
GPRS/GSM networks. With USB interface connecting to a
laptop or a desktop PC, it integrates the functionality of a
modem and a mobile phone (SMS), and combines mobile
communication with Internet perfectly. It supports data and
SMS services through the mobile phone network, enabling
you to communicate anytime and anywhere.
Getting to know your device
The following figure shows the appearance of the MF823. It
is only for your reference. The actual product may be differ-
ent.
1. Indicator
2. Front Cover
3. USB Connector
4. microSDHC™ card slot
5. SIM card slot
Hardware Installation
1. Open the front cover to remove it from the modem.
NOTE:
Do not open the front cover rudely so as to avoid the dam-
age of the front cover.
2. Insert the SIM card into the SIM card slot.
3. Insert the microSDHC card into the microSDHC card
slot.
NOTE:
microSDHC logo is a trademark of SD-3C, LLC.
4. Replace the front cover and click it into place.
5. Connect the Modem to your laptop or desktop PC. Plug
the USB connector into your computer's USB port and
make sure that it is tightly inserted.
The OS will automatically recognize the new hardware,
and then start the installation wizard.