Zte MF820D Quick Manual

LTE USB Modem
Quick Guide
MF820D
Introduction
The ZTE USB modem is a multi-mode USB modem, working in LTE FDD/UMTS/GSM networks. With
USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a
mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data and
SMS services through the mobile phone network, enabling you to communicate anytime and anywhere.
Specification
The following table shows the specification of your device.
Interface Type USB 2.0 HIGH SPEED
Systems supported Supports most types of laptop and desktop PC.
Operating systems Windows XP, Vista, Windows 7
supported MAC 10.4, 10.5, 10.6
Functions SMS service, Data service, Connection management, etc.
Network Standards LTE FDD/UMTS/GSM
LTE FDD: DL 100Mbps, UL 50Mbps
HSDPA: DL 42Mbps
Transmission speed (Max)
HSUPA: UL 5.76Mbps
EDGE: DL 296kbps, UL 236.8kbps
Storage: -40°C ~ +80°C
Temperature
Operation:-10°C ~ +60°C
Dimension 94mm×37mm×14.5mm
Getting to know your device
The following figure shows the
appearance of the MF820D.
It is only for your reference.
The actual product
1. USB Connector
may be different.
2. Front Cover
3. Indicator
4. (U)SIM card slot
Hardware Installation
1. Put finger on the bottom finger grip, and then lift the front cover of the modem to release and
remove.
Notes: Do not open the front cover rudely so as to avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then push
SIM/USIM card as far as possible, shown as the following picture.
3. Put the front cover of the modem flatly upon the body of modem. Direct the front cover towards the
locking catches on the sides of the modem and push the front cover of the modem to lock the front
cover into its place.
4. Connect the Modem to your laptop or desktop PC.
• Rotate the USB connecter and plug the modem firmly into a USB port on your computer.
• Plug the USB connector into your computer's USB port and make sure that it is tightly inserted.
• The OS automatically detects and recognizes new hardware and starts the installation wizard.
Warning and Notice
To the owner
• Some electronic devices are susceptible to electromagnetic interference sent by modem if
inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer
of the device before using the modem if necessary.