Table of Contents
Advertisement
OPTIONAL FLOOR STAND INSTALLATION
1. Align clearance holes on floor stand with screw holes on bottom
of heater, as shown in Figure 12.
2. Attach floor stand to heater with (4) screws provided with floor
stand.
3. Connect the gas line.
Installation on Rugs and Tile
If this appliance is installed directly on carpeting, tile or other
combustible material, other than wood flooring, the appliance shall
be installed on a metal or wood panel extending the full width and
depth of the appliance.
Attention: Optional Floor Stand meets requirement.
The base referred to above does not mean the fire-proof base as
used on wood stoves. The protection is for rugs that are extremely
thick and light colored tile.
Page 12
SR-18 Shown
Figure 12
16010-10-0314
Advertisement
Table of Contents
