Table of Contents
Advertisement
Figure 3. These are the settings for COM1—the Com port attached to
4. Open the "Control Panel" by
double-clicking on it.
5. Open the "Ports" control panel
by double-clicking on it. See
Figure 2.
6. Select the port that is attached to
the Computertop TV-I.
the Computertop TV-I.
7. Click on the "Settings" button.
8. Make sure that the settings of
Computertop TV-I
your Com port match those in
Figure 3. You might get an error
message if this port is in use.
Attach the ComputerTop TV-I
to a different serial port.
9
Advertisement
Table of Contents
