Attaching The Ac Power Adapter - Black Box Computertop TV-I User Manual

DC POWER ADB
Plug in the
small end of
the supplied
AC power
adapter here.
Macintosh Users:
Connect one end of the supplied
mini-DIN-4-to-mini-DIN-4 ADB cable
to either of these connectors.
Connect the other end to your
Macintosh. You might have to
connect your Macintosh cable from
your keyboard to the other
connector (see text in Section 3.2
for further information).
Figure 1. The rear panel of the Computertop TV-I.
A
UDIO
The Audio Output can be routed to
any device that accepts line level
audio. Use an RCA to 3.5mm audio
cable to connect the AUDIO OUT
jack on the Computertop TV-I to an
audio device. If you are using the
Macintosh microphone input
(available on newer Macintosh
computers), you will need a Line
Level to Microphone Level Adapter
cable, as described in your
Macintosh manual. If you are using
PC
ADB COMM PORT
Windows Users:
Connect one end of
the supplied Mini-
DIN-8-to-DB25 cable
here and the other to
either Com Port 1 or
Com Port 2 on your
PC.
AUDIO OUT
Connect one end of
the supplied RCA
to RCA video cable
here and the other
end to your digitizer
(or other device
television signal).
Attach the
appropriate cable
(not supplied) to
this RCA jack and
the other end to
your audio device.
another type of device, you need to
supply the appropriate cable.

3.4 Attaching the AC Power Adapter

Uncoil the cord attached to the
supplied AC adapter. Plug the small
end into the 15V DC POWER
connector on the Computertop
TV-I. Plug the transformer into a
standard AC socket. The LED on the
front panel will be lit to indicate that
the Computertop TV-I has power.
Computertop TV-I
VIDEO OUT AERIAL IN
that accepts a
The Cable/Aerial
input jack is a
standard F-type
antenna jack—
accepts either
cable or
antenna input.
7