Managing Your Gateway And Connected Networks; Start The Gateway Web Manager - ARRIS/Motorola SURFboard SBG6400 User Manual

Managing Your Gateway and Connected Networks

5
Use the SBG6400 Web Manager to view and monitor the configuration settings and operational status
of your gateway. You can also configure your network connections and wireless security settings. See
Protecting & Monitoring Your Wireless Network
Note: If you did not purchase your gateway from a retail store, you may notice a few blocked configuration
settings in the SBG6400 Web Manager that cannot be modified. This may be due to some restrictions set up
by your service provider to prevent unauthorized changes to certain configuration parameters.

Start the Gateway Web Manager

Note: You must use the default user name and password (listed below) to log in to the SBG6400 Web
Manager for the first time. For network security purposes, ARRIS recommends that you change the gateway
default user name and password after logging onto the SBG6400 for the first time. See
User Name and Password
1. Open any web browser on the computer connected to the SBG6400.
2. In the Address bar, type
. The gateway Login screen displays.
Enter
3. Type the default user name and password. Both entries are case-sensitive.
ο Username: admin
ο Password: password
4. Click Login to open the SBG6400 Web Manager. The SBG6400 Main Screen displays (see Figure 19).
Note: If the default user name and password are not working, your service provider may have to set up
alternate login credentials. Please contact your service provider or call
assistance.
SURFboard® SBG6400 Wireless Cable Modem Gateway • User Guide
This document is uncontrolled pending incorporation in an ARRIS CMS
365-095-26377-x.1
Managing Your Gateway and
for more information.
for more information.
for the Gateway Web Manager IP address, and then press
192.168.0.1
Connected Networks
ARRIS Technical Support
Change the Default
for
19