Set Up A Wireless Network Using Your Computer; Quick Connect Using The Windows Taskbar - ARRIS/Motorola SURFboard SBG6400 User Manual

Setting Up a Wireless Network Connection

Set Up a Wireless Network Using Your Computer

Use one of the following options to create your wireless network:
•

Quick Connect Using the Windows Taskbar

•
Connect Using the Windows Control Panel
Note: The steps for setting up a wireless network may differ slightly depending on the Windows operating
system running on your computer. The steps used here apply to Windows 7.
Quick Connect Using the Windows Taskbar
1. From the Windows taskbar, click the Wireless Link icon to open the list of available wireless
networks.
Note: If the icon is not visible, click the Show hidden icons button shown below.
2. Locate and then left-click on the SBG6400 wireless network name or SSID (for example,
SBG6400-#####) for your SBG6400 from the wireless networks list (see Figure 13).
The default SSID is located on the gateway label on the bottom of your SBG6400.
Note: You have the option to customize your wireless network name or SSID after completing your initial
wireless network connection. However, you must use the default SSID listed on the gateway label for the
initial gateway installation. See
SURFboard® SBG6400 Wireless Cable Modem Gateway • User Guide
This document is uncontrolled pending incorporation in an ARRIS CMS
365-095-26377-x.1
Figure 11 – Sample Available Wireless Networks Window
Figure 12 – Windows Taskbar Icons
Change Your Wireless Network Name (SSID) for more information.
14