Table of Contents
Advertisement
3. Place chocks in front of and behind the
wheels which will remain on the ground to
prevent them from rolling. Use heavy
wooden blocks or large stones for exam-
ple.
4. Cars with steel rims have removable
wheel covers. Use the removal tool to
hook in and pull off any full-wheel wheel
covers. Alternatively, the wheel covers
can be pulled away by hand.
5. Screw together the towing eye with the
wheel wrench* until the stop position in
accordance with the following figure.
IMPORTANT
The towing eye must be screwed into all
threads in the wheel bolt wrench.
6. Remove the plastic caps from the wheel
bolts with the intended tool.
7. Loosen the wheel bolts ½-1 turn anti-
clockwise with the wheel wrench.
09 Wheels and tyres
WARNING
Never position anything between the
ground and the jack, nor between the jack
and the car's jacking point.
8. There are two jacking points on each side
of the car. There is a recess in the plastic
cover at each point. Crank the foot of the
jack down so it is pressed squarely on the
ground.
IMPORTANT
The ground must be firm, smooth and
level.
9. Lift the car so that the wheel is free.
Remove the wheel bolts and lift off the
wheel.
*
Option/accessory, for more information, see Introduction.
09
}}
335
Advertisement
Table of Contents
