Table of Contents
Advertisement
07 Driver support
||
Overview
BLIS lamp location
32
.
Indicator lamp
BLIS symbol
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehi-
cle. If the car is overtaken on both sides at
the same time then both lamps illuminate.
Maintenance
07
The sensors for the BLIS functions are
located inside the rear wing/bumper on each
corner of the car.
NOTE: The illustration is schematic - details may vary depending on car model.
32
*
260
Option/accessory, for more information, see Introduction.
Keep this surface clean - also on the left-hand
side.
•
To ensure optimal functionality the areas
in front of the sensors must be kept
clean.
Related information
•
BLIS* - operation (p. 260)
•
BLIS - symbols and messages (p. 264)
•
CTA* (p. 262)
BLIS* - operation
BLIS (Blind Spot Information System) is a
function designed for providing support for
the driver when driving in dense traffic on
roads with several lanes in the same direction.
Activate/deactivate BLIS
BLIS is activated when the engine is started.
This is confirmed by the indicator lamps in
the door panels flashing once.
Button for activating/deactivating.
The BLIS function can be deactivated/acti-
vated by pressing the BLIS button on the
centre console.
Some combinations of the selected equip-
ment leave no vacant space for a button in
the centre console - in which case the func-
tion is handled by the car's menu system MY
CAR (p. 110).
Advertisement
Table of Contents
