3 Change settings
This section helps you change the settings of
this player.
1
DISC MENU
POP-UP
TOP
MENU
MENU
2
OK
DISC MENU
POP-UP
TOP
MENU
MENU
3
OK
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press
exit the menu, press
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV display]: Select a picture display
•
format to fit the TV screen.
[HDMI video]: Select an HDMI video
•
resolution.
[HDMI Deep Color]: Display colors
•
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
•
[Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
Downloaded From Disc-Player.com Philips Manuals
Watch 3D video
BACK. To
.
[Watch 3D video]: Set to 3D or 2D
•
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
•
[Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
[Neo 6]: Enable or disable a surround
•
sound effect which is converted from
2.0 channel audio.
[HDMI (MAIN) audio]: Select an audio
•
format for sound output when this
player is connected to a TV through
HDMI OUT (MAIN) connector.
•
[HDMI (AVR) audio]: Select an audio
format for sound output when this
player is connected to a AV receiver
through HDMI OUT (AV RECEIVER)
connector ("AVR" is short for "AV
Receiver").
[Digital Audio]: Select an audio format
•
for the sound output when this
player is connected through a digital
connector (COAXIAL or OPTICAL).
[PCM Downsampling]: Set the
•
sampling rate for PCM audio output
EN
19