Honda Accord Sedan 1997 Reference Owner's Manual page 231

JACKING POINT
9. Find the jacking point nearest the
wheel you are removing. Place the
jack under the jacking point. Turn
the end bracket clockwise until
the top of the jack contacts the
jacking point. Make sure the
jacking point tab is resting in the
jack notch.
EXTENSION
WHEEL WRENCH
10. Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
Changing a Flat Tire
11. Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
Placing the wheel face down could
mar its finish.
Taking Care of the Unexpected
CONTINUED