Installing The Front Thermal Sensor; Removing The Power Switch - Dell OptiPlex 9010 Mini-Tower Owner's Manual

5. Gently press the tabs from both sides to release and remove the thermal sensor away from the chassis.

Installing the Front Thermal Sensor

1. Gently secure the thermal sensor to the chassis.
2. Thread the thermal sensor cable into the chassis clips.
3. Connect the thermal sensor cable to the system board.
4. Install the cover.
5. Follow the procedures in

Removing the Power Switch

1. Follow the procedures in
2. Remove the:
a) cover
After Working Inside Your Computer .
Before Working Inside Your Computer .
27