Turntable, Vent Fan, Surface Light, Sound Level, Auto Nite Light - GE SpaceMakerXL JMV1420 Technical Service Manual

TURNTABLE
The turntable should be left on for the best cooking results,
however when a large dish must be used the turntable can be
turned off and the rack used. Illustrations shown are the
correct ways to use the rack and turntable. Press TURN-
TABLE to turn the turntable off or on.
NOTE: it is normal for the turntable at times to become hot to
the touch.
NOTE:
JVM1600s'
have TWO
shelves.
VENT FAN
The vent fan removes steam and other vapors from surface
cooking. Press VENT FAN once for high speed, twice for low
speed, and a third time to turn the fan off.
SURFACE LIGHT
The surface lights have been moved to the outside of the
bottom of the oven and now are a tubular bulb. Press SUR-
FACE LIGHT once for bright light, twice for the night light and
three times to turn the light off.
BEEPER VOLUME
The beeper sound level can be adjusted up, down, or off.
Touch BEEPER VOLUME and choose 0-3 for mute to loud.
AUTO NITE LIGHT
This feature will allow the night light to be turned on and off at
any time. To Use Auto Nite Light:
1. Press AUTO NITE LIGHT.
2. Enter the time you want the light to turn on and select AM/
PM.
3. Press AUTO NITE LIGHT again and enter the time you
want the light to turn off and select AM/PM.
4. Press AUTO NITE LIGHT.
NOTE: NITE will stay lit to remind you that the feature is set.
You can review the auto nite light settings by pressing AUTO
NITE LIGHT. To erase the settings and turn off the feature
press AUTO NITE LIGHT, then 0.
9