Installing Standard Lp Gas Tank - Blue Rhino GAD15002T Assembly Information

installing standard LP gas tank

Standard LP Gas Tank
To operate, you will need one precision-filled standard LP grill gas tank with
external valve threads.
W Caution: LP gas tank must be properly disconnected and
removed prior to moving this outdoor fireplace.
Inserting and Securing LP Gas Tank
1. Make sure the control knob is in the " OFF" position (Figure 2).
2. Lubricate the threads of the regulator/hose assembly with
petroleum jelly. Line up threads on regulator/hose assembly with
regulator.
3. Insert and rotate LP Gas Extension Hose clockwise until they
fit snugly together. HAND TIGHTEN ONLY. Be careful not to
crossthread when screwing in LP Gas Extension Hose (Figure 6).
4. Secure the LP Gas Extension Hose to the base with the LP Gas
Extension Hose (Figure 7).
5. Loosen LP gas tank retainer bolt by turning counter-clockwise
(Figure 9)
6. Place precision-filled LP gas tank upright into hole in outdoor
fireplace body so the tank valve is facing the gas line connection
(Figure 8).
7. Secure tank by turning LP gas tank retainer bolt clockwise until
tight (Figure 9).
QUESTIONS?
Just call 800.762.1142 for parts and service. For faster service, have the DPCI number ready when when calling.
Figure 5
20 lb
9 Kg
12.2 in. / 31 cm
Figure 7
Figure 9
Figure 6
Figure 8
17