Heat & Glo RED40 Installation Manual page 15

Fire Risk. Explosion Risk.
Do NOT pack insulation or other combustibles between ceiling fi restops.
• ALWAYS maintain specifi ed clearances around venting and fi restop systems.
• Install wall shield and ceiling fi restops as specifi ed.
Failure to keep insulation or other material away from vent pipe may cause fi re.
Top Vent - Horizontal Termination
Venting with 1 elbow
V Minimum
1
1 ft. 305 mm 2 ft.
2 ft. 610 mm 6 ft.
3 ft. 914 mm 9 ft.
4 ft. 1219 mm 12 ft.
5 ft. 1524 mm 15 ft.
6 ft. 1829 mm 18 ft.
7 ft. 2134 mm 21 ft.
8 ft. 2438 mm 24 ft.
V + H = 63 ft. (19.2 m) Maximum
1 1
Figure 4.5
H Maximum
1
610 mm
1829
2743
3658
4572
5486
6401
7315
Heat & Glo • RED40, RED40ST Installation Manual • 2155-980 Rev. C • 11/13
WARNING
Note: 12 inches minimum vertical is
required prior to attaching any elbow
to the appliance.
H
1
Note: Use DVP Series
components only.
V
1
15