Universal Wedge Terminal Selection; Terminal/Keyboard Settings - Datalogic PowerScan RF User Manual

Universal
Wedge
Terminal
Selection
Terminal/
Keyboard
Settings
Systems Manual
To activate the Universal Wedge interface, follow these instructions:
1. Scan the START bar code.
2. Determine the I.D. of the terminal/keyboard. Refer to the Ter-
minal/Keyboard Settings section below for more information
plus a listing of the most common keyboard I.D.s.
3. Scan the Activate Universal Wedge Interface bar code.
4. Use the Universal Wedge Number Pad to scan in the digits for the
keyboard I.D. number you determined in step 2.
5. Scan the END bar code.
START----------------------------------------
Activate Universal Wedge
Scan the digit(s) representing the desired keyboard I/F type using
the Universal Wedge Number Pad, then scan the END bar code.
END ------------------------------------------
The list below contains the most common terminal/keyboard types. If
your specific system is not listed below, consult the Universal Key-
board Wedge Connectivity Guide for a detailed listing of terminal/
keyboard types. A copy of the guide can be obtained from the internet
at the website listed on the back cover of this manual, or call your
dealer for customer support information.
Keyboard
High Speed PC/AT, PS2
PC AT, PS2
MAC
Interface
Terminal I.D.
591
11
25
43