Nvr11/11-P/41/41-P/41-8P/41-W Series - LINOVISION NVR4104W User Manual

When you remove the HDD, please refer to the following figure to pull the spring up and then remove the
HDD.

3.3.2 NVR11/11-P/41/41-P/41-8P/41-W Series

1. Loosen the screws of the
upper cover and side panel.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
horizontally
. After the HDD is in
the proper position, the columns
on the two sides can lock the
screw holes of the HDD to secure
it.
2. Fix four screws in the HDD
(Turn just three rounds).
5.
Fix the HDD firmly.
3. Place the HDD in accordance with
the four holes in the bottom.
6. Connect the HDD cable and
power cable.
81