LINOVISION NVR4104W User Manual page 49


Fast play
Play previous |

Reverse/Pause
|
Play Next

Play/Pause
Mult
Window switch
Shuttle(outer
ring)
Jog(inner dial)
USB port
Remote control
ACT
indicator light
Status indicator
Status
light
Power indicator
PWR
light
Channel indictor
1-32
light
IR Receiver IR
Various fast speeds and normal playback.
In playback mode, playback the previous video
In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
Click it to switch one-window/multiple-window.
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to
backward.
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
To connect USB storage device, USB mouse.
Remote control indicator light
If there is Fn indicator light , current status indicator light is null.
Power indicator light
For 4/8/16-channel series product.
The corresponding channel light becomes on when system is
recording.
For 32/64-channel series product:
When the light flashes slowly, it means the corresponding
channel of 1-16 channel is recording now (Such as channel 1).
When the light flashes fast, it means the corresponding channel
of 17-32 channel is recording now (Such as channel 17)
When the light becomes on, It means the corresponding 2
channels are recoding now (Such as channel 1 and channel 17.).
The channel indictor light here does not show the status of
It is to receive the signal from the remote control.
the 33-64-channel.
37