Rear Panel; Nvr100/100-P Series - LINOVISION NVR4104W User Manual

Please refer to the following sheet for front panel button information.
Name
Power button
Assistant
USB2.0 port
IR receive
window
Power indicator
light
HDD abnormal
indicator light
Network
abnormal
indicator light
Alarm indicator
light

2.2 Rear Panel

2.2.1 NVR100/100-P Series

The NVR100 rear panel is shown as below. See Figure 2-12.
The NVR100-P rear panel is shown as below. See Figure 2-13.
Icon Function
Power button, press this button for three seconds to boot up or
shut down NVR.

One-window monitor mode, click this button to display
assistant function: PTZ control and image color.

Backspace function: in numeral control or text control,
press it for 1.5 seconds to delete the previous character
before the cursor.

In motion detection setup, working with Fn and direction
Fn keys to realize setup.

In text mode, click it to switch between numeral, English
character (small/capitalized) and etc.

In HDD management interface, you can click it to switch
HDD record information and other information (Menu
prompt)

Realize other special functions.
To connect USB2.0 storage device, USB2.0 mouse, burner and
etc.
It is to receive the IR signal from the remote control.
Power indicator light.
HDD error occurs or HDD capacity is below specified threshold
value, the light becomes red to alert you.
Network error occurs or there is no network connection, the light
becomes red to alert you.
The light becomes on when an alarm occurred.
Figure 2-12
42