Hitachi FT-01 User Manual page 27

Troubleshooting (Continued)
Problem Checkpoints
Are the Finger Touch Unit and projector installed
correctly?
touch
Check each installation position.
positioning
alignment
Is the computer image projected within the area of the
cannot be
screen?
performed
Use by installing at a position where the screen size
correctly.
is 60 to 100 inches when the digital zoom is set to the
maximum (100%) and the KEYSTONE and PERFECT
FIT functions are not being used. If the KEYSTONE and
Is a part of the image enlarged using the Magnify
function?
Press the MAGNIFY OFF button on the remote control to
restore the normal display.
the computer larger than 1280 x 800?
the computer to lower than 1280 x 800.
Is ambient light falling on the screen?
Darken illumination or close the curtain so that the light
cannot fall on the screen as much as possible.
AUTO CALIBRATE may fail when the shadow of a
Stay away from the screen when performing AUTO
CALIBRATE.
Perform MANUAL CALIBRATE when AUTO CALIBRATE
failed many times.
FT-01
27
Ref. page
10
6
6