Table of Contents
Advertisement
Troubleshooting
WARNING
Phenomena that may be easy to be mistaken for machine defects
according to the following table.
Problem
Checkpoints
Finger Touch
Is the projector positioned too close to the screen?
Use by installing at a position where the screen size
function does
is 60 to 100 inches when the digital zoom is set to the
not operate.
maximum (100%) and the KEYSTONE and PERFECT
FIT functions are not being used.
Are the projector and screen used at the following
places?
Near light sources that include a strong infrared
component such as white incandescent bulbs and
halogen lamps.
Place that is exposed to direct sunlight.
Near infrared wireless microphones.
Is ambient light falling on the screen?
Darken illumination or close the curtain so that the light
cannot fall on the screen as much as possible.
Is transmission between the screen and the sensor
obstructed?
Make sure that the area between the sensor at the top
surface of the projector and the screen is not obstructed
(transparent and meshed objects are also not allowed).
such as when a casing for theft prevention is used.
Is the camera lens dirty?
cloth.
Other than those above
Disconnect the USB cable connecting the projector and
FT-01
and contact your dealer or service company.
24
Ref. page
6
6
6
Advertisement
Table of Contents
