1150 Antenna Assembly - Lenovo YOGA 3-1170 Hardware Maintenance Manual

YOGA 3-1170 Hardware Maintenance Manual

1150 Antenna assembly

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1110 LCD unit" on page 46
• "1130 LCD front cover" on page 49
• "1140 Hinges, LCD cover, and MIC board" on page 50
Figure 15. Removal steps of antenna assembly
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows .
1
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
52