1150 Antenna Assembly And Lvds Caple - Lenovo IDEAPAD 120S Hardware Maintenance Manual

Lenovo ideapad 120S-11IAP/Lenovo ideapad 120S-14IAP
Hardware Maintenance Manual

1150 Antenna assembly and LVDS caple

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Hard disk drive (Lenovo ideapad 120S-11IAP (with HDD))" on page 34
• "1030 Battery pack" on page 35
• "1040 Solid state disk (Lenovo ideapad 120S-14IAP/ Lenovo ideapad
• "1050 PCI Express Mini Card for wireless LAN" on page 39
• "1060 USB board" on page 41
• "1070 Speaker" on page 43
• "1080 Touchpad module" on page 44
• "1090 Battery bracket (Lenovo ideapad 120S-14IAP)" on page 48
• "1100 System board" on page 49
• "1110 Upper case" on page 52
• "1120 LCD unit" on page 54
• "1130 LCD hinges" on page 56
• "1140 Integrated camera" on page 59
Figure 15. Removal steps of antenna assembly and LVDS caple
Peel off the adhesive tape 1.
Remove the screws 2, then remove the antenna assembly in the direction
shown by arrow 3.
60
120S-11IAP (without HDD))" on page 38
Step Screw (quantity)
M1.6 × 3.5 mm, Phillips head, nylok-coated (4)
2
antenna assembly bracker + A cover
1
3
1
Color Torque
Black Lenovo ideapad
120S-14IAP:
1.5±0.5 kgf*cm
Lenovo ideapad
120S-11IAP:
1.0±0.2 kgf*cm