YOGA 3-1170 Hardware Maintenance Manual
1140 Hinges, LCD cover, and MIC board
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1110 LCD unit" on page 46
• "1130 LCD front cover" on page 49
Figure 14. Removal steps of Hinges, LCD cover, and MIC board
Disconnect the MIC board connector
. Adjust the hinges
and remove the
1
2
hinge rubbers
. Then remove the LCD module in the direction shown by
3
arrow
.
4
When installing:
• Make sure that the connector is attached firmly.
• Push the LCD module in the direction shown by the arrow on illustration
below, otherwise the hooks of the LCD cover might be damaged.
50