Harbor Freight Tools 99871 Instructions And Precautions

InstructIons and precautIons
saVe tHese InstructIons. read all
precautIons and InstructIons.
©
Copyright 2008 by Harbor Freight Tools
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.

unpackIng

When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the
number shown on the cover of this document as
soon as possible.
• This product comes with the bladeless
insert in place.
Important saFetY
InFormatIon
Assembly precautions
1. Before first use, remove the bladeless insert
and wash all parts is warm, soapy water. Use
antibacterial soap if desired.
99871
distributed exclusively by Harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
®
. All rights reserved. No portion of this document or any artwork contained
kItcHen slIcer
WItH 3 Blades
2. Also wash after every use. Care must be
taken when cleaning parts with blades.
a. The use of a small brush when cleaning
the bladed inserts would make the cleaning
procedure safer and more efficient.
3. These stainless steel blades are extremely
sharp. Be very careful when handling and
changing blades.
4. Keep assembly area clean and well lit.
5. Do not assemble when tired or when under
the influence of drugs or medication.

use precautions

1. Use Food Holder to push food through
blades.
2. This product is not a toy. Do not allow chil-
dren to play with or near this item.
®
.