Harbor Freight Tools 92049 Assembly And Operating Instructions

Beverage holder beverage holder insulated - 12 vdc ted - 12 vdc

Download this manual

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

BEVERAGE HOLDER

INSULA

INSULA TED - 12 VDC

INSULA

3491 Mission Oaks Blvd., Camarillo, CA 93011

TED - 12 VDC

92049

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2: Specifications
Do not operate the Beverage Holder if the power cord or connector are damaged. Do not submerge the Beverage Holder in water. Do not expose the operating Beverage Holder to extreme, external heat. Do not overtighten the Dispenser Cap or Cup. 10. Not intended for use by children. SKU 92049 Page 2...
Page 3 Unpacking When unpacking, check to make sure the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Dispenser Valve Cap...
Page 4 If the unit does not warm up, the 10A fuse in the Fused Plug may need replacement. Unscrew the plug cap to view and replace fuse. If the fuse is good, the unit is not receiving power, or it is defective and needs servicing by a qualified technician. SKU 92049 Page 4...