Installing The Stand Or Wall-Mount Bracket; Installing The Stand - Insignia NS-40D420NA16 User Manual

NS-40D420NA16/NS-40D420MX16 Insignia 40" 1080p 60Hz LED TV

Installing the stand or wall-mount bracket

• If you want to place your TV on a table or in an entertainment center, go to
• If you want to mount your TV on a wall, go to
Notes

Installing the stand

1 Align the stand column with the stand base, then secure the column to the base with the four provided
(ST4 × 16 mm) screws (the long screws).
• If you plan to wall-mount your TV, do not install the stand.
• Store the stand and stand screws in case you decide to use the stand in
the future.
Screw type
ST4
www.insigniaproducts.com
Installing a wall-mount bracket.
Screw length # of screws
16 mm
Installing the stand.
4
5