Scsi-3 Commands; Tape Alert Flags - Seagate STU62001LW Viper Product Manual

42

SCSI-3 commands

Tape Alert flags

Code Command
0Bh Set Capacity (proposed for SSC-2)
44h Report Density Support
55h Mode Select (10-byte version)
56h Reserve Unit (10-byte version)
57h Release Unit (10-byte version)
5Ah Mode Sense (10-byte version)
A0h Report LUNS
The Viper 200 supports version 3.0 of the Tape Alert specification. The following
flags are supported by the drive.
Parameter Description
3 Hard Error
4 Media
5 Read Failure
6 Write Failure
9 Write Protect
11 Cleaning Media
14 Irrecoverable snapped tape
15 Memory in Cartridge Failure
16 Forced Eject
17 Read Only Format
18 Tape Directory Corrupted
20 Clean Now
21 Clean Periodic
22 Expired Cleaning Media
23 Invalid Cleaning Cartridge
30 Hardware A
31 Hardware B
32 Interface
34 Download Fault
Viper 200 LTO Product Manual
Type
Warning
Critical
Critical
Critical
Critical
Information
Critical
Warning
Critical
Warning
Warning
Critical
Warning
Critical
Critical
Critical
Critical
Warning
Warning