Advertisement
Part
USB (Front)
For connecting the USB mouse (the best way to control and use your DVR).
Power LED
Lights up when your DVR is switched on.
HDD LED
Blinks when hard drive is active.
Video Inputs
For connecting your cameras to display video feed on your TV.
Audio Inputs
For connecting microphones to record sounds in your camera surroundings.
Audio Output
For connecting speakers to play sounds (only if you have connected microphones).
VGA port
For connecting to your TV using a VGA cable (not supplied).
HDMI port
For connecting to your TV using the HDMI cable.
USB/
For connecting a USB or eSATA storage device to back up recordings.
eSATA1 port
An additional eSATA port to connect a hard drive to increase recording capacity in addition
eSATA2 port
to the internal hard drive.
Network port
For connecting to your home network router for Internet connectivity using the Ethernet cable.
Power Input
For connecting the power adapter.
Switches the power of the DVR on and off. Pressing the switch to the <|> position turns it on
Power Switch
and pressing it to the <0> position turns it off.
Alarm In/Out
For connecting external sensors and alarm devices such as sirens and lights.
Block
PTZ
For connecting a Pan, Tilt & Zoom camera.
Description
2
Advertisement
