GMC 2016 Acadia User Manual page 181

180 Infotainment System
Brightness: Select to adjust the
screen brightness.
Speed Compensated Volume :
Select OFF, Low, Medium, or High
sensitivity to automatically adjust
the volume to minimize the effects
of unwanted background noise that
can result from changing road
surfaces, driving speeds, or open
windows. This feature works best at
lower volume settings where
background noise is typically louder
than the sound system volume.
Audible Touch Feedback : Select
to adjust the volume of the beep
that is played after touching a
screen button.
Notification Prompt Volume :
Select to adjust the volume of the
notification prompts.
Set Time:
Press the up or down arrows to
change the Hours, Minutes, AM,
PM, or 24 hour setting on the
clock.
Press and hold to quickly
increase or decrease the time
settings.
Press OK to save the
adjustments.
Press the Back or Cancel screen
button to cancel the
adjustments.
Set Date:
Press the up or down arrows to
increase or decrease the Month,
Day, and Year settings.
Press and hold to quickly
increase or decrease the date
settings.
Press OK to save the
adjustments.
Press the Back or Cancel screen
button to cancel the
adjustments.
XM Categories : If equipped, press
to customize which available XM
Categories are displayed and used
in the system.
Create AS IS Infotainment
File : This is used for dealer
troubleshooting.
Open Source Software : Select to
view software website information.
Rear Vision Camera (If
Equipped)
The rear vision camera can assist
the driver when backing up by
displaying a view of the area behind
the vehicle.
To access the rear camera display
settings, press Display from the
Home screen, then press the Rear
Camera screen button. The
following options are available:
Symbols : Press to enable or
disable the Rear Park Assist (RPA)
symbols presented over the rear
camera video.
Guidelines : Press to enable or
disable the RPA dynamic guidelines
presented over the rear camera
video.
See Rear Vision Camera (RVC)
0 221.
Screen Brightness
To adjust the screen brightness,
touch the screen, then press + or
on the brightness control.