GMC 2016 Acadia User Manual page 178

Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the List Command
1. Press / .
2. Say Directory.
3. Say Hands-Free Calling.
4. Say List.
Making a Call
Calls can be made using the
following commands.
Dial or Call : The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial : This command allows a
phone number to be dialed by
entering the digits one at a time.
Re-dial : This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press / .
2. Say Dial or Call.
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Calling 911 Emergency (U.S. and
Canada)
1. Press / .
2. Say Dial or Call.
3. Say 911.
4. Say "Dial" or "Call.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
Infotainment System
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / .
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After
each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re-dial Command
1. Press / .
2. After the tone, say Re-dial.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
177