Pairing The Soundbar And Subwoofer - Denon HEOS Owner's Manual

Contents

Pairing the soundbar and subwoofer

The subwoofer and soundbar are paired at the factory. However if the
communication is interrupted, follow this procedure.
1
Press the "PAIR" Button on the subwoofer until the
Status LED flashes blue.
The soundbar power is turned on.
2
Press the "PAIR" Button on the back of the soundbar.
The Status LED on the subwoofer will be solid blue.
Status LED
n
Amber LED: Subwoofer is not paired to soundbar.
Blue LED: Subwoofer is paired to soundbar. Your system is ready.
Setup Use Troubleshooting
Power Modes
o Network Standby
To save power, the device will automatically enter "Network Standby"
whenever there is no network access or playback for 20 minutes and
will automatically resume to full power whenever the device is selected
and playing music. There is no visible indicator or LED that will show
that the device is in Network Standby as it is a fully automatic function.
50
Status LED Appendix