Network Settings]; Easy Network Settings] - Sony BDP-S6500 Operating Instructions Manual

[Network Settings]

x [Internet Settings]
Connect the player to the network
beforehand. For details, see "Step 2:
Preparing for Network Connection"
(page 19).
[Wired Setup]: Select this when you
connect to a broadband router using a
LAN cable.
[Wireless Setup(built-in)]: Select this
when you use the wireless LAN that is
built into the player for wireless network
connection.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
x [Network Connection Status]
Displays the current network status.
x [Network Connection
Diagnostics]
Checks for the proper network
connection by running the network
diagnostics.
x [Screen mirroring RF Setting]
[Auto]: Sets the RF (Radio Frequency)
channel band automatically for Screen
mirroring connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/
CH 6/CH 11 as priority.
x [Connection Server Settings]
Sets whether or not to display the
connected server.
34
x [Auto Renderer Access
Permission]
[On]: Allows automatic access from
newly detected DLNA controller-
compatible product.
[Off]: Turns off the function.
x [Renderer Access Control]
Displays a list of DLNA controller-
compatible products and sets whether or
not to accept commands from the
controllers in the list.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Turns the player on or off using
your remote device when connecting to
the network.
[Off]: Turns off the function.
[Easy Network
Settings]
Select [Easy Network Settings] to
specify the network settings. Follow the
on-screen instructions.