Network Settings] - Sony BDP-S6700 Operating Instructions Manual

z
For details, refer to the instruction manual
supplied with the TV or components.
[Linked to TV-off]
[Valid]: Automatically turns off the
player when the connected TV enters
standby mode (BRAVIA Sync).
[Invalid]: Turns off the function.
x [DUALSHOCK(TM)4 wireless
controller]
You can register and manage your
wireless controller here. Follow the on-
screen instructions.
b
DUALSHOCK™4 wireless controller uses
Bluetooth technology. Check that [Bluetooth
Mode] in [Bluetooth Settings] is set to [On]
(page 29).
x [Auto Standby]
[On]: Automatically returns to standby
mode if no button is pressed for more
than 20 minutes.
[Off]: Turns off the function.
x [Auto Display]
[On]: Automatically displays
information on the screen when
changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when
you press DISPLAY.
x [Software Update Notification]
[On]: Sets the player to inform you of
newer software version information
(page 26).
[Off]: Turns off the function.
32
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when disc playback stops.
Connect to the network for
downloading.
[Manual]: Downloads the disc
information when [Video Search] or
[Music Search] is selected.
x [Device Name]
Displays the player's name. The player's
name can be changed.
x [System Information]
Displays the player's software version
information and the MAC address.
x [Software License Information]
Displays information about the Software
License.

[Network Settings]

x [Internet Settings]
Connect the player to the network
beforehand. For details, see "Step 2:
Preparing for Network Connection"
(page 17).
[Wired Setup]: Select this when you
connect to a broadband router using a
LAN cable.
[Wireless Setup]: Select this when you
use the wireless LAN that is built into the
player for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
www.sony.eu/support
x [Network Connection Status]
Displays the current network status.