Fuse Replacement Instructions - Quintezz XT-9500 User Manual

If your unit does not work anymore (no test while
switching on), we advise you to complete the
following checks:
• Is the power cord properly plugged in at both
ends?
• Is the fuse OK?
• Is the cigar lighter socket clean and free from corro-
sion?
• Is the ON/OFF key (PWR) used to switch the unit
ON?

FUSE REPLACEMENT INSTRUCTIONS

Do not use any tools to change the fuse.
• Press the top of the fuse holder down and rotate it
anti-clockwise approx. 30°. Lift the top straight up.
• Remove the fuse and replace if required by one
of the same rating. The silver tip contains a spring
which may fly off when disassembling. The fuse
should be inserted before the spring.
• Place the top of the fuse-holder back on the
body. Press down and rotate the top of the fuse
holder clockwise approx. 30°.
NOTE :
• Failing to press the top of the fuse holder down
prior to rotating it will damage the fuse holder. Use
of pliers to rotate the top may also cause damage.
• The illustration indicates the direction that the fuse
holder top must be rotated to reassemble.
GB-7