Wide Band Options; Reset; Maintenance - Quintezz XT-9500 User Manual

H. WIDE BAND OPTIONS
For the different bands X/Ku, K and Ka, you can set
different tones and set the band ON or OFF. Press
the 'CITY' key for 2 seconds to start setting. The
display shows the current settings. Use the 'MUTE'
key to set the X/Ku band ON or OFF, the -key for
the K band and the -key to set the Ka band ON
or OFF.
Press the 'CITY' key again to set the tone. Use
the 'MUTE' key to select strength I, the -key for
strength II and the -key for strength III. Press the
'PWR' key to finish setting.
Important: If during programming you wait longer
than 20 seconds to press a key, programming will
automatically end.
CITY
MUTE X/Ku ON/OFF
K ON/OFF
Ka Narrow ON/Ka Wide ON/Ka OFF
CITY
MUTE Tone I
Tone II
Tone III
To test the indication of each signal, you can put the
unit in Test-mode by pressing the 'CITY' and 'MUTE'
key simultaneously. If you press the ON/OFF key
(PWR), you go back to Standby-mode.
I. RESET
This action makes it possible to undo all settings
and to go back to the default settings.
• Keep the ON/OFF (PWR) and the 'MUTE' key
pressed simultaneously.
• Turn the unit on by connecting the cigar lighter
plug.
• Wait a moment till you hear 2 small beeps.
• Release the ON/OFF (PWR) and the 'MUTE' key.

MAINTENANCE

To keep your detector in good condition, follow
these simple steps :
• Never leave the set on the visor, windshield or
dashboard when you park your vehicle.
• Do not expose the unit to moisture.
• Always unplug the power cable or turn off the
power when not in use.
GB-6