Automatic Operation; Operating Menu; Start And Standby - Air Master AML 100 Operator's Manual

4.2.3.

Automatic Operation

auto
Automatic operation is started using a timer, night time
cooling, sensors, external contacts or an analogue CTS
system.
The current air flow and text "auto" are shown on the control
panel with a blue light above the fan symbol.
Read also "Control system functions" on page 23.
Air flow can be over- or underridden manually. Automatic
operation is cancelled and the text "auto" will disappear.
4.2.4.

Operating Menu

Start the operating menu by pressing the function but-
ton (pos. 2 under "Control Elements" on page 11). Press a
menu point to open the menu or activate/cancel a function.
Depending on the menu, related function fields will also be
changed. These can include text fields such as "Confirm",
"Switch off", "Cancel" or fields with symbols. Pop-up texts
can also appear for certain menus.
AUTO
START
STANDBY
For group operation, see "Airlinq BMS" on page 20.

4.2.4.1. Start and Standby

Start or restart automatic operation.
Press menu field "
>> The unit will start according to its programming if
a start signal is active, or automatic operation will be
reactivated after manual override. The current air flow
will show with 5 blue stripes. Text "auto" will show with
blue light.
Start operation manual.
Press menu field "
>> The unit will start with standard air flow and standard
inlet air temperature (see side 18). Text "auto" will
show with blue light. After 4 hours (time can be adjusted
to 0, 1, 2, ... 255 hours using a PC with Airlinq Service
Tool loaded) the unit will return to automatic operation.
Standby.
Press menu field "
operation.
>> The unit will stop for 1 hour (time can be adjusted
to 0, 1, 2, ... 255 hours using a PC with Airlinq Service
Tool loaded) and then start at the next start signal.
Otherwise, the unit can be started earlier by using the
operating menu. The air flow indicator will flash slowly
alongside minimum.
13
AUTO".
START".
STANDBY", if the unit is in