Yamaha RX-V540 Service Manual page 31

Neo:6
Reference data
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Input level Volume
Each ch, -20 dBm -10 dB
Both ch, -20 dBm -10 dB
L/C/R/RL/RC/RR signals are NEO:6 processed by
CS49329 and C/RL/RC/RR signals are output through
Sub DSP-DRAM. CS49329 is selected for the MAIN L/R
output. The NEO:6 mode is fixed to Cinema 6ch.
When DD/dts input is used, the signal is decoded by YSS-
938 and then L/R signal is NEO:6 processed by CS49329.
When AAC input is used, the signal is muted. When
NEO:6 decoding is used, the LFE signal is not output.
Neo:6 (Auto)
Analog
A/D
Digital
RX-V540/RX-V540RDS/HTR-5650/HTR-5650RDS/DSP-AX540
RX-V440/RX-V440RDS/HTR-5640/HTR-5640RDS/DSP-AX440
SPEAKER OUTPUT (1kHz)
MAIN L/R CENTER
- ∞
+23.5 dBm
- ∞
+17.1 dBm
Neo:6
decode
CS L/R
AD or CS L/R
DIR
DD/dts
CS49329
decode
(/Through)
(Shaded items not used in this example)
REAR CENTER RL/RR
- ∞ - ∞
- ∞ - ∞
RC/- C/- LS/RS L/R
CS49329
L/R
C
L/R
Sp Config
is in L/R output.
LS/RS
RL/RR
C/LFE
RC
Main DSP Sub DSP
4Mbit DRAM
SUBWOOFER
OUTPUT (50Hz)
-9.5 dBm
- ∞
CS L/R
DIR L/R
YSS L/R L/R
Virtual or HP
L/R
C/SW
-/RC
RL/RR
FL/FR
31