Menu Screen Functions - Radio Thermostat CT50 Operation Manual

10
PG

MENU Screen Functions

Press MENU to bring up MENU screen.
TIME of DAY
Touch the left (backward) or right (forward) arrows next to the time display to set
the current time (1 minute per touch). Touch and hold the arrow for fast time set (15 minute jumps).
DAY of Week
Touch DAY area to select present day.
SWING
(HVAC cycling rate) This feature allows you to set the desired variance in temperature
between the CT50 setting and the room temperature required before the heating or cooling system
will turn on—from 0.5° to 2.0° F (.25° to 1° C). For example, if SWING is set to 2.0° F and the CT50
is set to 70°F Target Temperature, the heat cycle will start when room temperature drops to 68°F.
Similarly, the cooling system will start when the room temperature increases to 72°F. The HVAC then
runs and will shut off at the Target Temperature.
To set SWING:
Touch SWING.
Touch the left/right arrows to set the SWING from 0.5° to 2.0°F.
The HVAC will run more frequently at .5°F and less at 2°F. Default is 1°F.
Touch to return to the MENU screen.
Chirp set
Touch this to turn the audible chirp sound on or off.
-