Philips Senseo HD7872 User Manual page 8

Put the plug in an earthed wall socket.
9
Press the on/off button 3. The button lights up
10
to indicate that you have to flush the machine.
To start flushing, press the 1-cup button q
11
and the 2-cup button qq briefly at the same
time.
• The on/off button starts flashing to indicate
that the flushing cycle has started. that the flushing cycle has started. that the flushing cycle has started.
• During the flushing cycle, the boiler fills itself During the flushing cycle, the boiler fills itself During the flushing cycle, the boiler fills itself
with water from the water reservoir and cold with water from the water reservoir and cold with water from the water reservoir and cold
water comes out of the coffee spout. During water comes out of the coffee spout. During water comes out of the coffee spout. During
the flushing cycle, the machine produces more the flushing cycle, the machine produces more the flushing cycle, the machine produces more
noise than during a regular brewing cycle. noise than during a regular brewing cycle. noise than during a regular brewing cycle.
8
ts flashing to indicate ts flashing to indicate
• When all the water in the water reservoir
has been used up, the flushing cycle is
finished and the machine switches off.
Fill the water reservoir with fresh tap water,
12
put the lid on it and place it back onto the put the lid on it and place it back onto the put the lid on it and place it back onto the
machine.
Your SENSEO machine is now ready for use
®
so that you can brew your first cup of delicious
coffee.