How To Add A User; How To Add An Existing User To A Second Keypad; How To Delete A User - Honeywell Tuxedo Touch Series Installation And Setup Manual

How to Add a User

To access User Setup and add a user, from the "Home" screen, do the following:
ICON
1. Press the Setup icon.
2. Press the System Setup icon.
3. Press the USER SETUP icon.
4. Press the ADD USER icon and enter your
Authorized Code.
5. Press the box next to Enter User Name.
6. Type in the user name (6 characters max.;
no spaces between characters) and press the
OK icon.
7. Press the box next to User Number and
enter an available (3-digit) user number;
press the OK icon.
8. Press the box next to Enter User Code,
enter the 4-digit User Code for this user
and press the OK icon.
9. Press the box next to RF Button Zone (if
used); enter the 3-digit RF Button Zone for
this user.
10. Press the Save icon.

How to Add an Existing User to a Second Keypad

After adding a user to the first keypad, the same user can be added to a second keypad. From the
second keypad go to "User Setup" and enter the same user name and same user code (refer to "How to
Add a User" above). The second keypad will automatically update the user information. Press Save.

How to Delete a User

Delete a User as follows:
ICON
1. Select the User you want to delete.
2. Press the DELETE USER icon.
3. Enter your Authorized Code.
4. Press the appropriate icon.
How to Edit a User
Note: You cannot edit a User name or User number. To modify a User name or User number, you must
delete the User and re-enter the User. Edit a User as follows:
ICON
1. Press the EDIT USER icon.
2. Enter your Authorized Code.
3. Select the options needed for this user
and press Save.
User System Setup (cont'd)
ACTION
ACTION
ACTION
• Use the Shift key for capital letters
• Use the BS (Backspace) key to make
corrections.
• The @#$ key is not available for use at this
time. These characters cannot be saved to the
control panel.
Select the partitions, access level, and enter an
available user number for this user.
For available user numbers, see the control panel
instructions.
If assigning this user to wireless key, enter one of
the zone numbers of the keyfob (the wireless key
must be programmed first before it can be
assigned to a user).
Three selections are available: add a user, edit a user,
or delete a user.
The Confirm Delete screen is displayed.
Three selections are available: add a user, edit a user,
or delete a user.
21
NOTES
NOTES
NOTES