Service Information For Eeprom Ic Setting - LG RH178H Service Manual

SERVICE INFORMATION FOR EEPROM IC SETTING

MICOM START
EEPROM ID CHECK
2 BYTE(B3,248,249)
Yes
ID OK?
Yes
OPTION DATA READ
5TIME & COMPARE
Yes
MICOM NORMAL
OPERATION START
*** EEPROM INITIAL ***
- SETUP is displayed in the field if pressing the Front ch- & ch+ Key with the Remocon number "clear"
key pressed in the status of powering on.
- AUTO SEARCH is done since the initial screen of ACMS is serviced if powering on.
DETECT NEW EEPROM (OPTION EDIT SCREEN)
No
MODEL NAME HEX
RH.S OPT1 00
OPT2 00
OPT3 00
OPT4 00
OPT5 00
No
OPT6 00
OPT7 00
OPT8 00
WRITE:OK EXIT:MENU,MP
MOVE:< > EDIT : __
OPTION WRITE : OK (OK KEY IN)
MASK : R00 , EEP : R00 , (D10)
(Each mask ,eeprom, It shows a development
release version.)
BINARY
00000000
00000000
00000000
00000000 (reserved)
00000000 (reserved)
00000000 (reserved)
00000000 (reserved)
00000000 (reserved)
1-6
OPTION CONFIRMATION MODE
Press the "CLEAR" key on the
Remote controller and the "CH - "
key one the Front Panel the same
time, then it goes in to Tracking
initial mode.