Service Information For Eeprom Ic Setting - LG RCT689H Service Manual

SERVICE INFORMATION FOR EEPROM IC SETTING

1. Press both "CLEAR" button on the Remocon and "
sec.
The picture on OSD will be as bellow :
OP1 : 0F
OP2 : 70
OP3 : 31
OP4 : 20
OP5 : 0A
OP6 : AA
OP7 : 44
OP8 : 05
OP9 : EC
OPA : 00
5
Checksum of Option : 0x1105
DVD read time : --- second
CD read time : 10 sec -- > OK
2. To MOVE from OP1 (Option 1) to another option, press
3. To CHANGE the option code, press
4. To APPLY the option Code, after change the option press OK/Enter button on Remote Control.
5. To INITIALIZE the system, press "CLEAR" button on the R/C together with "
Panel about ±5 sec.
Note : This process will only clear the mapping channel and not delete data on HDD.
6. To exit from the option Code menu without Initialize the system, just turn off the power and then turn on
again.
00000000
00000000 071102A
00000000
00000000
00000000
00000000
00000000 Write : OK
00000000 E x i t : MP
00000000 Move : < >
00000000 E d i t :
button on the Remote Control.
1-5
OPEN/CLOSE" button on the Front Panel about ±5
button on the Remote Control.
OPEN/CLOSE" on the Front