General Guidelines - Luxibel LX116 User Manual

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.

Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.

Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.

Mechanical wear and LEDs are not covered by warranty.

A qualified technician should install and service this device.

Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.

This device is designed for professional use on stage, in discos, theatres, etc. The device should only
be used indoors with an alternating current of 240 VAC, 50 Hz.

Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.

Use the original packaging if the device is to be transported.

Keep this manual for future reference.
4. Features
The PIXMOVE 6 is a newly designed motorized linear LED luminaire in the Prolights range. It is conceived
to achieve high-brightness and versatility. The LX116 has 6 x 8 W RGBW LEDs that can be controlled in
pixel-to-pixel mode, with 250° motorized tilt inclination through DMX. Several pre-programmed dynamic
effects are available in the internal memory, which can be combined with multiple reproduction methods
and colour macros. This PIXMOVE 6 is perfect for architectural constructions on stage.

12 x 8 W RGB high-power LEDs

motorized tilt axis with rotation to 250°

auto mode with presets for automatic programmes with speed control

master/slave mode for stand-alone operations

DMX controlled from basis to advanced modes
6-channel mode: RGBW, tilt, tilt speed
o
8-channel mode: RGBW, dimmer, shutter, tilt, tilt speed
o
10-channel mode: RGBW, shutter, macro, auto, auto speed, dimmer, tilt, tilt speed
o
26-channel mode: RGBW for each pixel, tilt, tilt speed
o

colour temperature presets from 3200 K to 10000 K

static reproduction of a colour via stand-alone mode

flicker-free (400 Hz)

power and signal link via powerCON and 3-pin XLR
V. 02 – 22/10/2014
LX116
4 ©Velleman nv