Accessories / Options - Panasonic Viera TH-P42GT20Z Operating Instructions Manual

Accessories / Options

Do not disassemble or modify the pedestal.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal for any other TV or displays.
●
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●
If you use the pedestal while it is physically damaged, personal injury may result. Contact your
nearest Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.
Ensure that the TV does not fall over.
●
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over
and personal injury may result.
Two or more people are required to install and remove the TV.
●
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by any methods other
than the specified procedure. (see below)
●
Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw (3)
(silver)
M5 × 18
Assembling the pedestal
Use the assembly screws
to the base securely.
●
Make sure that the screws are securely
tightened.
●
Forcing the assembly screws the wrong way
will strip the threads.
D
Adjusting the panel to your
desired angle
Do not place any objects within the full rotation
range.
6
Attaching / removing the pedestal
Assembly screw (4)
(black)
to fasten the pole
A
Front
(View from the top)
: 15° : 10°
(TH-P42GT20Z) (TH-P46GT20Z)
Pole
M5 × 30
Securing the TV
Insert the pole into the TV, and then fasten
securely with the assembly screws
●
Tighten the four assembly screws loosely at
first, then tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level
surface.
Hole for pedestal
installation
Removing the pedestal from the TV
Be sure to remove the pedestal in the following
way when using the wall hanging bracket or
repacking the TV.
Remove four assembly screws
Pull out the pedestal from the TV.
Remove three assembly screws
pole.
Base
B
Arrow mark
[View from the bottom]
.
D
from the TV.
from the