Panasonic Viera TH-P42GT20Z Operating Instructions Manual page 33

Menu Item
Digital Audio
Preference
SPDIF Selection
MPEG Optical
Level
HDMI1 / 2 / 3 / 4
Input
Reset
Sound Defaults
3D Settings
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset
PC Settings
H-pos
V-pos
Reset DVI
Position Settings
Off Timer
USB HDD Setup
Child Lock
Adjustments / Configurations (alternatives)
Selects the initial setting for audio tracks (Dolby D / HE-AAC)
Dolby D : The priority is given in the following order - Dolby Digital,
HE-AAC, MPEG1.
HE-AAC : The priority is given in the following order - HE-AAC, MPEG1,
Dolby Digital.
●
Dolby Digital is the method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be multi-
channel audio.
●
HE-AAC is a perceptual coding method used to compress digital audio
for efficient storage and transmission.
●
MPEG1/Layer-2 is an audio compression method that compresses
audio to the smaller size without any considerable loss of audio quality.
●
Digital TV mode only
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal (Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For Digital TV mode, Video mode (p. 54) or Network video contents
(p. 64)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is louder comparing with the other types of audio track.
●
Digital TV mode only
Select to fit the input signal (Digital / Analogue) (p. 75).
Digital : HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
●
HDMI input mode only
Press the OK button to reset settings of the present Mode, Balance,
Headphone Volume and Surround in the Sound Menu to the default.
Adjusts and sets to view 3D images (p. 26)
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Registers the connected USB HDD and makes the settings for the
recording (p. 46)
Locks a channel / AV input to prevent access to it (p. 42)
●
Set to the minimum level if noise occurs
33