TABLE OF CONTENTS
Specifications ........................................................................... 1
2-4. Main Board ................................................................. 4
.......................................................... 5
..................................................... 19
LOCATION AND FUNCTION OF CONTROLS
.................................... 20
SECTION 1
GENERAL
- 2 -
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
This section is extracted from
instruction manual.