FujiFilm Finepix J10 Basic Manual page 162

94
I
Installation on a Mac OS X
Pre-installation checklist
• Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Power Macintosh G3*2, PowerBook G3*2,
Compatible Mac*l
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5, MacBook,
MacBook Pro or Mac Mini
~
,
Operating System
Mac
as x
(compatible with version 10.3.9 to 10.4.10)
RAM 256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display
800 x 600 pixels or better, at least 32,000 colors
• To use the FinePix Internet Service or mail attachment function:
Internet connection*3 An Internet connection or e-mail transmission software is needed
• Connection speed: 56 kbps or better recommended
*1
PowerPC, Intel processor loaded
*2
Models with a USB port as a standard feature
*3
Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CD
CAUTION
• Connect the camera directly to the Macintosh using the USB cable. The software may not operate correctly if you use an extension
cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.